Air Data Test Sets and Systems

Ramp or Flight line Air Data Test Sets

D.Marchiori (DMA) manufacture various RVSM Air Data Test Set models for troubleshooting, leak testing and certification of aircraft pitot-static systems. The feature rich MPSXX Air Data Test Set range enable rapid calibration of altimeters, airspeed indicators, mach indicators, vertical speed indicators, Air Data Computers (ADC) and other avionic pitot-static components. Features include:

• RVSM compatible
• Digitally controlled
• Controlled from keyboard or computer interface
• Precise pressure sensors used to achieve high accuracy
• 5,000 hour pumps
• Engineered to minimize power consumption
• Optional internal multiple static and pitot isolators and output ports
• Battery power
• Simple user interface
• Programmable user test sequences
• Bluetooth remote control
• Compact Flash card for storing results
• Automatic calibration software (with PAMBX transfer standard)
• Wide range of options
• Rapid warm-up

Starting with the low cost MPS38B RVSM ADTS the range includes the MPS31C civil ADTS, the MPS27C ADTS and the MPS34C flightline ADTS with laboratory accuracy. The MPS35C and MPS39C control three pressures separately and independently to verify the Angle of Attack (AOA) as well as Static and Pitot pressures, for use with 'Smart' type pitot tubes.

A wide range of options are available for the Air Data Test Sets with some models pre-configured with certain options:

• 28 VDC operation
• IEEE488 control (RS232 control is standard on most models)
• ARINC429 interface
• PDA for bluetooth control
• Multiple isolated static and pitot outputs controlled from the keypad
• ADWIN software for PC control
• Hand held remote control unit
• Encoding altimeter readout
• Military ranges of 850 or 1,000 kts
• Internal battery
• External battery to extend battery life
• External pressure and vacuum supply

All the ramp/flight line ADTS are portable and can also be used in the laboratory. ADWIN PC software allows control of the test systems from a standard PC. In all models low power consumption generates negligible heat and allows the highest accuracy available today. Optionally the ADTS can be remotely controlled by a PDA Pocket PC with Bluetooth connection (no cables required). The user interface ensures all the functions are easily controlled with a minimum of key strokes. The instruments are all ready for use and within the accuracy band at the conclusion of the initialisation / self test procedure.

All the Air Data Test Sets have battery power either fitted as standard or available as an option. This allows the test sets to be operated away from ac power or to continue to be used during power failure.

All models are supplied complete with internal pumps running 'on demand' to achieve maximum life duration and low electrical power consumption. Noise level is very low, a welcome feature when the ADTS is used in the workshop.  

30 User test profiles are programmable and executable, each with 26 test points, enabling repetitive tests such as FAR43 testing to easily be performed with high repeatability.

Calibration is accomplished through user adjustment of calibration constants without the requirement for hardware adjustments.

Contact the office to discuss any specific customer requirements such as radio altimeter automatic test.

Laboratory Air Data Test Sets

DMA is a leading manufacturer of Air Data Test Set models for laboratory use achieving the highest accuracy and resolution. The MPS36 is digitally controlled through a keyboard, it uses the most accurate pressure sensors currently available, with a special characterisation for maximum accuracy (for static channel ±2 feet at s.l.) Pressure resolution of 0.2 Pa.is also achievable. The intuitive user interface ensures that all the functions are controlled with a minimum of key presses. The ADTS can be used in avionics ATE systems for automated pitot-static testing through RS232 and/or GPIB/IEEE488. An internal or external rack mounted pump unit can be supplied as an option.

Air Data Test Set Features

Type No	MPS27C	MPS30	MPS30BW	MPS31C	MPS34C	MPS35C	MPS36	MPS38B	MPS39C
Picture Click to enlarge
Data sheet Click to download			See MPS30
Accuracy	Hi	Hi	Hi	Hi	Very Hi	Hi	Very Hi	Hi	Hi
Case	flightline	flightline	flightline	flightline	flightline	flightline	Rack	flightline	flightline
Size	large	large	large	medium	large	large	3U high	small	large
Range Alt	max	max	max	medium	max	max	max	medium	max
Large Pump	yes x 1 2 as option	yes x 2	yes x 2	yes x1	yes x 2	yes x 2	n/a	no	yes
Keyboard	yes	no	no	yes	yes	yes	yes	yes	yes
Hand Terminal	Option	yes	yes	Option	yes	Option	Option	no	yes
Flash Card	yes	no	no	no	yes	yes	no	no	no
Battery	yes-4hr	Option	Option	yes-2hr	yes-4hr	yes-4hr	no	no - an external option available	yes-4hr
4+4 Isolate	Option	Option	yes	Option	yes	yes	Enquire	no	Option
3+3 Isolate	Option	Option	no	Option	no	no	no	no	no
2+2 Isolate	Option	Option	no	Option	no	no	no	no	no
Bluetooth Remote	Tx/Rx std. PDA Option	Tx/Rx std. PDA Option	no	Tx/Rx std. PDA Option	Tx/Rx std. PDA Option	Tx/Rx std. PDA Option	Tx/Rx std. PDA Option	no	Tx/Rx std. PDA Option
Alt. Encoder	Option	Option	yes	Option	yes	Option	Option	no	Option
Angle of Attack (AoA)	no	no	no	no	no	yes	no	no	yes
GPIB	Option	Option	Option	Option	Option	Option	Option	no	Option
28V DC	Option	Option	Option	Option	Option	Option	no	no-use EPU8E	Option
ARINC	Option	Option	Option	Option	Option	Option	Option	no	Option

Click to see enlargement of Hand Terminal and Bluetooth Remote Control

Associated Products

The EPU8E extends battery life to 8 hours

Type	EPU8E
Picture Click to enlarge
Data Sheet Click to download

Pressure and vacuum supply unit for MPS36

Type	EPS1
Picture Click to enlarge
Data Sheet Click to download

Pitot-static adaptors

A large variety of pitot-static adaptors can be supplied to interface Air Data Test Sets to aircraft and helicopters. The adaptors are supplied in a rugged waterproof case, complete with PVC pipes, red warning flags, pneumatic connections to ADTS, and in some instances with suction fixing pipe stands to aircraft static ports. A colour code allows the identification of the static or pitot ports connected, this feature is useful when using the Multiple Isolator Option available on our ADTS. Adaptors have a special design to safeguard the aircraft pitot static ports, which could be damaged if poor quality fixing devices are used.

Type	Pitot-static adaptors
Picture Click to enlarge
Data Sheet Click to download

Technical Notes

The following technical notes provide further information on product options (PDF documents).

Pitot-Static Adaptor Kits
ADWIN Software for PC control of Air Data Test Sets
Bluetooth control of ADTS from a PDA or PC
ARINC 429 and MIL-STD-1553 interface buses for the MPS range
Multi-port switching option
Rack mounted Pressure and Vacuum supply unit
Radio Altimeter Ground Proximity Warning Computer testing